SM66-AR-110直流電源的power sink選件
SM3300 power sink選件介紹
SM 18-220 訂貨代碼P306
SM 66-AR-110 訂貨代碼P308
SM 100-AR-75 訂貨代碼 P309
SM 330-AR-22 訂貨代碼 P310
SM 660-AR-11 訂貨代碼 P311
電源接收器選項允許電源吸收反饋到設備的功率。內部模塊感測電源狀態(tài)并吸收輸出端子上的電流，從而保持恒定的輸出電壓。當電源在低負載條件下步進編程為較低電壓時，電源接收器選項允許更快的響應。
可吸收高達300W的峰值功率
無論輸出功率是正還是負（源和匯），都能保持輸出電壓設置
為電機提供PWM速度控制的理想解決方案。這些系統(tǒng)通常在制動動作期間將電力返回給電源
適用于在空載條件下需要快速下編程的ATE系統(tǒng)的理想解決方案
生成汽車波形（快速）
Power Sink Specifications
Sink Power Ratingmax. peak power (electronically limited)max.continuous power (Tam.= 25 *C)max. continuous power (Tam.= 50 *C)
Max. duration Sink Peak PowerFaik =Pmx,Tamb = 25 9C
Duty Cycle for use at Peak PowerPsnk =Pmx , Tamb = 25 9C
Max. Sink Current(V.>=2 Vand P <= Pma)
Prtection
Recoven time/ DeviationVo=6V,le:+100A--30 Arecovery within 100 mv/ deviation:
Vo=15V,l.:+100A--10Arecovery within 100 mv/ deviation:
Vo=24V,1.:+70A--7.5Arecovery within 100 mv/ deviation:
Wo=60V,1.:+35A--3Arecovery within 100 mv' deviation.
Vo =300 V1. +8A →-0.5 Arecovery within i v /deviation
Vo =600 Vle +4A --0.25 Arecovery within 1 V /deviation:
(oad current swiches from posifvelo negafive)
Programming Down SpeedFall time at no load (90-10%)Fall time at no load wihout Power Sink
Fall time at no load (90-10%)Fall time at no load wihout Power Sink
Unit with Fast Programming Option
Fal time atno load (90-10%)Fall time atno load whout Power sink
Fall time at no load (90-10%)Fall time at no load wifhout Power Sink
aralleland Series operationRefer to power sink manual fordelails and restrictions.
SM18-220Option P306
SM66-AR-110Option P308
SM100-AR-75Option P309
SM330-AR-22Option P310
SM660-AR-11Option P311
300VV300VV275VV
continuous@Psx=300V
100%@Pnk=300W
Limitedat75A
- 上一篇：沒有啦
- 下一篇：INT MOD SER 安裝使用注意事項 2025/3/10
